Tag: command prompt
January 07, 2009 by
Jason
If you need to make firewall settings repeatedly on a single computer as conditions change or, perhaps, on a fleet of computers you’ll find working with Windows Firewall (the Control Panel application) or Windows Firewall With Advanced Security to be a bit cumbersome. The Netsh command, using its Firewall or Advfirewall context, provides an alternative way to view or modify all manner of Windows Firewall settings. For example, you can enable Windows Firewall with this command:
netsh firewall set opmode enable
The Netsh Firewall context can be considered the basic context, where you can find current firewall settings at a high level. It’s roughly comparable to the Windows Firewall application in Control Panel. From the command prompt, you can see the basic configuration by typing:
netsh firewall show config
Read More»
Posted in Windows Vista | No Comments »
December 23, 2008 by
Jason You’ve read the reviews and digested the key feature enhancements and operational changes. Now it’s time to delve a bit deeper and uncover some of Windows XP’s secrets.
1. It boasts how long it can stay up. Whereas previous versions of Windows were coy about how long they went between boots, XP is positively proud of its stamina. Go to the Command Prompt in the Accessories menu from the All Programs start button option, and then type ’systeminfo’. The computer will produce a lot of useful info, including the uptime. If you want to keep these, type ’systeminfo > info.txt’. This creates a file called info.txt you can look at later with Notepad. (Professional Edition only).
2. You can delete files immediately, without having them move to the Recycle Bin first. Go to the Start menu, select Run… and type ‘gpedit.msc’; then select User Configuration, Administrative Templates, Windows Components, Windows Explorer and find the Do not move deleted files to the Recycle Bin setting. Set it. Poking around in gpedit will reveal a great many interface and system options, but take care some may stop your computer behaving as you wish. (Professional Edition only). Read More»
Posted in Windows XP | 4 Comments »
December 21, 2008 by
Jason These are some uncommon but very useful tips tricks & hacks for windows vista to enhance the user experience in windows vista.
Enable Auto-Logon in Windows Vista (Warning: Security Risk)
a) click Start and type ‘netplwiz’ or click that name on the Start menu
b) in the GUI window that comes up, uncheck the “Users must enter a username and password to use this computer” box
c) click ‘Apply’
d) in the new dialog box that opens type the name of the account you want to auto-logon by default (if the account is not normally passworded then it blank)
e) click OK and exit.
Remove ToolTips From Showing When You Mouse Over Something
a) start > run = “regedit”
b) HKEY_CURRENT_USER > Software > Microsoft > Windows > CurrentVersion > Explorer > Advanced
c) set “ShowInfoTip”=dword:00000000
d) exit and reboot Read More»
Posted in Windows Vista | No Comments »
November 20, 2008 by
Jason Mr Dave Glover of Blogs.MSDN.com wrote a guide on how to create a USB Thumb Drive Vista Installer. The article is interesting because recently a friend of mine wishes to install Windows Vista onto a laptop in which DVD drive is not working anymore (it’s already dead).
BTW, this is really useful for all DVD less laptops. So, I wrote a Complete Step-by-Step Beginner’s Style Guide on how to do it easily, Not Just For the Geeks But For All.
1. Format the USB Stick as NTFS: Open Windows Explorer and Right-Click the Drive > Choose the Format Option
2. In the File System Combo box, Choose NTFS and Click the Start Button to begin.
3. Afterwards, Open the Command Prompt as Administrator: In Start Search type, cmd > Press CTRL + Shift + Enter
or you will get… “Access is denied” Message after launching diskpart command. Read More»
Posted in Windows Vista | 10 Comments »
October 10, 2008 by
Jason
Ever thought of becoming an actual “hacker”? This article shows how to change a computer password and do other things using a command prompt. A command prompt is a command using the special built-in program that comes with every computer which allows you to do almost anything on a computer.
1. Open Command Prompt. If you don’t know how, open the Start menu, go to Programs (or on Windows 2000 and up, all programs), go to Accessories, then you’ll see Command Prompt, click it.
2. You’ll see a black screen pop up.
3. Type in: “Net User”
4. It will then show you a detailed little chart of all the User Accounts on the computer.
5. Choose which account you want to hack.
6. Say it says the user accounts are: Owner, Administrator, John, Alice, Christopher, and Guest. Read More»
Posted in Computer | 1 Comment »
October 05, 2008 by
Jason Are you experiencing problems with your computer network? Are these error messages appearing?:
- Unable to clear the DNS cache
- Unable to renew your IP address
- An operation was performed on something that is not a socket
- Unable to clear the ARP cache
If so, here are some potential solutions for Windows XP/Vista.
1. Check to make sure your computer is on and is connected to a network.
2. Be aware that Windows has a built in function to repair a network connection. This function can give valuable information in the form of an error message if you know what you are looking for. Some common error messages given are:
- Unable to clear the DNS cache
- Unable to renew your IP address
- Unable to clear the ARP cache Read More»
Posted in Computer | No Comments »
September 29, 2008 by
Jason Get your hands on a USB drive that’s at least 3GB in size. You’ll also need a Windows Vista installation disk.
Format the USB Drive
1. Insert the USB drive into your computer.
2. Right-click Computer in the Start menu and then select Manage.
3. Select Disk Management under Storage in the left column of the Computer Management window.
4. Right-click the USB drive in the bottom center section of the Computer Management window and select Format. Warning: Make sure you select the right disk to format. Formatting a disk will erase all data on it.
5. Change the file system to NTFS and then click OK to format the USB drive.
6. Wait for the USB drive to be formatted. The formatting progress will be shown in the Computer Management window. Read More»
Posted in Windows Vista | 3 Comments »
September 29, 2008 by
Jason Open up an administrator mode command prompt by right-clicking on the shortcut and choosing Run as Administrator, then type in diskpart to load up the disk partitioning command line tool.
The most important step is to run the following command, which will give you the numbers of the disks, so you can use it in the next command (and not accidentally remove a partition on another drive).
list disk
Now that you know the correct number for the disk, you can use the select disk command, substituting the number 1 for whatever number your flash drive is set to: Read More»
Posted in Windows Vista | 1 Comment »
September 08, 2008 by
Jason Here are solutions to some common problems with AutoPlay.
The AutoPlay options only appeared once: the first time I plugged in a device or inserted a disc. How can I find them again, so I can choose a different action?
To see the options one time, right-click the device or drive, and then click Open Autoplay. If the device isn’t plugged in, hold down SHIFT and plug in the device. You can also hold down SHIFT while inserting a disc to see the list of options.
To see the options every time you plug in a device or insert a disc, follow these steps:
1. Open AutoPlay by clicking the Start button , clicking Control Panel, clicking Hardware and Sound, and then clicking AutoPlay.
2. In the list next to the device or type of disc, click Ask me every time. Read More»
Posted in Computer | No Comments »
Some users are experiencing problems with their USB flash drive even when they have been guaranteed that they are compatible with Windows Vista. This is usually due to the wrong software drivers being installed. When you plug in your USB flash drive for the first time you may be required to install the drivers for it, however most USB flash drives do not come with a CD containing their drivers. The majority of drivers for USB flash drives will already have been installed with Windows Vista, so when you are asked to install the driver software for your USB flash drive select Locate and install driver software and then on the next screen choose I don’t have the disc. Show me other options, unless you do have a disc with the driver software on it, in which case allow Windows Vista to search the CD for the correct driver. Assuming that you do not have a CD with the software on it, choose Browse my computer for driver software and then instruct Windows Vista to look for the driver software on the hard drive where you installed Windows Vista. Make sure that the Include subfolders checkbox has been checked and then press Next to search your hard drive for the driver software. Once the software has been found a window may appear telling you that Windows cannot verify the publisher of the software, and as long as you are confident that the drivers are correct, select Install this driver software anyway. You may need to repeat these steps two or three times as new USB devices are found and it is important that you complete these steps for every device, otherwise your USB flash drive will continue to not be recognised. Read More»
Posted in Windows Vista | No Comments »
Loading ...
