Tag: reboot
November 24, 2008 by
Jason
Someone had once remarked that simplicity is making the journey of life with just baggage enough. Sometimes, I try to apply the same axiom to my ‘soft aware’ life too. And that involves squeezing the maximum juice out of what’s available in my computer.
One thing that has always been available since the last 20 years from the birth of Windows has been the ‘un-noteworthy’ Notepad. Life with Notepad couldn’t be any simpler. It strips all formatting and keeps data in its plain format. It doesn’t ask for any special Windows resources, comes up in a blink of an eye and doesn’t nag you with any dialog boxes or prompts.
We all use Notepad to store our scraps of data as text files. But with a little bit of tip and tuck it can be made into an effective sticky note. Here I am going to show you how to get your own version of sticky notes with just the Notepad and any version of Windows. Read More»
Posted in Software | No Comments »
November 21, 2008 by
Jason It is very common when windows users complain that their computer systems loaded with windows takes ages to get started and takes a hell lot of time to load some applications in the startup. So, in order to get an active running windows which can respond to user actions you need to give some minutes to the computer to load the startup programs first.
Windows users always say there computer were faster in the beginning and used to take very few seconds to get started and running, but with time they say it gets slow and take so much time to get started.
What is the reason behind slow startup on your old computer?
From the time you first start using a computer, you keep installing a various computer software, games and other applications and install various hardware devices drivers many of which create startup entries to run the following. Read More»
Posted in Computer | 2 Comments »
November 08, 2008 by
Jason Every time a file is read from your Linux ext3 partition it writes back a attribute to the file detailing the last access time. There are very few programs that actually use this to operate and it slows everything down.
Disabling atime and diratime on your Linux ext3 file systems can improve disk performance up to 40%!
WARNING: If you are using programs such as tmpwatch, mutt, or mail-notify this configuration change could cause those programs that make specific use of atime not to work.
1. Start a terminal.
2. Switch to root using the “su -” command.
3. Backup your fstab – “cp /etc/fstab /etc/fstab.old”.
4. Open your /etc/fstab in the editor of your choice (nano, kate or gedit recommended). This can be done by issuing the command “nano /etc/fstab”, “kate /etc/fstab”, or “gedit /etc/fstab”. Read More»
Posted in Linux | No Comments »
October 06, 2008 by
Jason If you wish to install Windows XP on a computer that comes with Windows Vista already installed then you will have to create a separate partition on your hard drive to install Windows XP onto. This effectively splits the hard drive into two, and keeps the different versions of Windows separate. To do this you need to open up the Computer Management screen by going to the Start menu and then right-clicking on Computer and selecting Manage.
From the Computer Management screen select Disk Management, right-click on your main hard disk where Windows Vista is installed and then select Shrink Volume. This opens up a window where you can choose how large you want the new drive partition for Windows XP to be. You need to select the size of the new partition carefully, as you will need enough space to be able to install Windows XP successfully (around 10 gigabytes) whilst leaving enough space for Windows Vista. After you have selected the appropriate amount of space click on the Shrink button to begin the process, and once that has completed you should be able to right-click on the new partition (which should be labelled “Unallocated free space”) and select New Simple Volume. Read More»
Posted in Windows Vista, Windows XP | 5 Comments »
October 05, 2008 by
Jason
Are you experiencing problems with your computer network? Are these error messages appearing?:
- Unable to clear the DNS cache
- Unable to renew your IP address
- An operation was performed on something that is not a socket
- Unable to clear the ARP cache
If so, here are some potential solutions for Windows XP/Vista.
1. Check to make sure your computer is on and is connected to a network.
2. Be aware that Windows has a built in function to repair a network connection. This function can give valuable information in the form of an error message if you know what you are looking for. Some common error messages given are:
- Unable to clear the DNS cache
- Unable to renew your IP address
- Unable to clear the ARP cache Read More»
Posted in Computer | No Comments »
October 04, 2008 by
Jason Registry tweaks can fix problems, boost performance and improve Windows features, and the risks are minimal as long as you follow our advice.
There are many ways to change your settings and your applications within Windows. You might click Edit > Preferences or Tools > Options, right-click on a system tray icon, or just poke around in your Control Panel. But the end result is almost always the same. When you’ve tweaked an option and clicked OK, the new setting will be stored in a central database called the registry.
Normally you don’t have to worry about low-level technical details of individual registry settings. But occasionally they can come in useful. If a program won’t start or can’t be reinstalled, for instance, it could be down to a corrupt registry setting: change it and you might fix the problem. Other applications have useful settings that can only be accessed from the registry, too.
There is a potential down side, though. If you delete the wrong registry setting you could corrupt an application, and even prevent Windows from loading on your next reboot. But then Windows Explorer can be dangerous, too, if you start randomly deleting things from the Windows or Program Files folders. Don’t worry though, as long as you’re cautious and sensible – registry editing actually poses very little risk. Read More»
Posted in Computer | 1 Comment »
September 21, 2008 by
Jason Normally, the blue screen of death contains a driver name, and some addresses; if you’re lucky, removing that driver will do the trick. But what if there is no driver name on the BSoD? And what if you don’t have all the skills to play with crashdumps and debuggers?
In this case, Autoruns comes to the rescue. This is a graphical tool that allows you to disable/enable drivers in a very easy way.
The strategy:
1. Boot into safe mode (since the system is crashing when you attempt to boot normally);
2. Start Autoruns, and switch to the Drivers tab;
3. Go through the list, and uncheck the drivers that are suspicious;
4. Close the program, restart and boot normally
The steps above will be repeated until the system is able to boot correctly.
When that happens, remember what were the last changes you applied, and try to enable some drivers back – until you figure out which one of them was causing the issue. Read More»
Posted in Computer | No Comments »
September 14, 2008 by
Jason Despite all its quirks, Windows does do some things for a good reason. Some files need to be locked down when they are in use, otherwise you risk damaging the file or harming the Operating System. Unfortunately Windows XP seems to be plagued by files that cannot be deleted. These are frequently simple files like videos (AVI), MP3s or other seemingly harmless files. You try to delete the file, Windows waits a few seconds before announcing that access is denied, the file is currently in use and cannot be deleted. However, you know it’s not in use and you just want it deleted.
If you have encountered this problem, here is a step-by-step process for trying to purge the files you can’t delete. It starts with the basics for Windows XP and moves on to more involved tricks. The process will work for all recent Windows releases, but Windows XP has been causing the most the problems, so we will focus on it. Please note: we are assuming that the file is not crucial to the operation of Windows – deleting important system files can cause havoc. Read More»
Posted in Windows XP | 2 Comments »
1. Boot up in no time
Make your PC leap out of bed with these simple tips. Does it seem like the more time you spend with your Windows XP installation, the longer your PC takes to pull itself out of bed when booting up?
It’s not a sign of old age; it’s the ever-growing accumulation of detritus that various applications and hardware deposit on your hard drive when you install them. Whether these items are functional or completely useless, they all take time to load.
Here’s how to trim the bloat and reduce the time it takes your PC to get ready for action.
2.Tools for faster boot times
Before you get started with this project, we recommend that you have the following: Read More»
Posted in Computer | 1 Comment »
Microsoft has warned end users that performing Windows XP Service Pack 3 and Windows Vista Service Pack 1 upgrades from copies of XP SP2 and Vista RTM, respectively, that have Onekey Recovery 5.0 installed will cause the operating systems to display a black screen following reboot. According to the Redmond company, the issue is generated by an incompatibility between the two service pack releases and Saming OneKey recovery software driver Safnt.sys.
This means that deploying SP1 on top of Vista RTM, or SP3 on top of XP SP2, with Onekey Recovery 5.0 also installed, will result in a black screen of death. Microsoft revealed that this scenario would happen whether the service pack upgrade is performed from Windows Update or through any other method. “This issue occurs when the computer contains Onekey recovery software that is earlier than version 5.1. If the computer uses the Onekey recovery software version 5.1 or later versions, this issue does not occur,” the company revealed, explaining that “Windows Vista SP1 and Windows XP SP2 are incompatible with Onekey Recovery 5.0.” Read More»
Posted in Windows Vista, Windows XP | 3 Comments »
Loading ...
